Dreamer’s Blog Dreamer's Blog

这几天我们寝室的被论文格式给折腾坏了，亏得自己还是学计算机的，对Word排版忒也不熟悉了。 In the past few days we dormitory of the paper format to the disruption was bad, Kuide their own or in the computer, the Word listeriosis not familiar with the layout. 几个室友已经拿着论文让老师检查好几次了，每次都是不合格，回来重新修改，现在他们已经把黑龙江大学论文格式要求都背下来了，包括页面设置等。 Several papers with a roommate have to check several times a teacher, always fail to return re-edit, and now they have the formal requirements of Heilongjiang University of papers are back down, including pages, and other settings. 昨天解决了一个重大问题，就是三线表的问题，记录下来。 Yesterday solve a major problem, that is, three-table issues, recorded.

论文中一般要求使用三线表，就是表格只能有上边框和下边框，再加上标题行下面要有一个细一点的边框，是为三线。 Papers in general require the use of third-line form, is on the table there can be only under the border and the border, coupled with a header following a fine line that the border is to third-line. 制作方法如下（我用的是Word 2003）： Production methods are as follows (I use the Word 2003):

1.点击表格左上方的“田”字型的标记（当鼠标悬停在表格上的时候就会出现），选中整个表格。 1. Form the upper left-click the "field" of the font tag (when the mouse is hovering in the form of time there will be), check the whole table.

2.点击右键，选中菜单中的“表格自动套用格式”，会弹出一个窗口。 2. Right-click and select the menu of "Form automatically applied format," a window will pop up.

3.点击右边的“新建”按钮，新建一个样式，这时又会弹出一个窗口，让你设置样式属性。 3. Click on the right of the "new" button, a new style, then will pop up a window that lets you set up style attributes.

4.弹出的窗口如图： 4. The pop-up window in Figure:

“名称”一栏可以随便填，这里我们填“三线表”。 "Name" can not fill the column, where we fill the "three-table."
“样式基于”这一项可以让你在已有样式的基础上添加一些新的属性，这里我们选择普通表格就行了。 "Based on the style" This one can let you in on the basis of style has been to add some new properties, here we choose to ordinary forms on the line.

5.重点在“格式应用于”这一栏，我们先选择“整个表格”，然后设置表格的上框线和下框线（点击图中的那个“田”字标记），左边那两个下拉菜单可以设置框线类型和粗细。 5. Focus on "format used in" this column, our first choice, "the form", and set the table on the borders and the borders (Click on the map of the "field" symbol), the two left under Rafah menu can be set borders type and size.

6.上面的做好之后再重新选择“格式应用于”一栏，选择“标题行”，设置标题行的下框线，按照要求设置框线类型和粗细。 6. Above do a good job after the re-choice "format for" column, select the "title", set up under the headline of the borders, in accordance with the requirements set borders type and size.

7.设置好之后点击确定，然后点击应用，当前表格就会被应用上三线表的样式了，大功告成。 7. Once set up Click OK, then click the application, the application forms will be on the three-table style, you're done.

8.其它表格只要在第2步的操作之后不新建样式，而是选中列表中的“三线表”直接应用样式就好了。 8. In other forms as long as the Step 2 after the operation is not new style, but check the list of the "three-line form of" direct application of a style like.

（提示，有时候设置会不太好使，比如会把三条线设置为同样粗细，这种情况下，你可以在第5步之后直接应用，然后修改“三线表”样式，直接进行第6步再应用，把第5步和第6步分别设置并且应用应该可以解决问题。） (Tips, sometimes less so that will be set up, such as three lines will be set up to the same size, such a situation, you can step 5 after the direct application, and then revise the "three-table" style, direct Step 6 Re-application, Step 5 and 6 were set up and further application should be able to solve the problem.)

BTW，我们的要求是上下框线1磅，中间那条框线0.75磅，我们把页面放大到500%才看出那么点区别，这论文要求……无语了。 BTW, our request is from top to bottom borders one pounds and 0.75 pounds middle那条borders, we enlarge the pages to 500 percent so that only points difference, this paper has asked…… Wu Yu. 由于缺乏我的指导，寝室的一个家伙是这么画三线表的：在设置好上下框线之后，用绘图工具开始绘制标题行下面那条线，他的表格又挺多，结果搞了一个下午………… Word 排版还是有必要专门学习一下的！ In the absence of my guide, a guy's bedroom is painted such a three-table: in the borders set up from top to bottom, starting with drawing tools to draw the title below那条line, he also Tingduo the table, the results of carrying out one afternoon… ……… Word layout still has the necessary expertise to study!

分享收藏 Share collections